Fix -s for httpsrv

bench/build.sh builds git refs or the working tree, each with the
Makefile it shipped with. bench/bench.py runs the client, the proxy and
the origin in network namespaces of their own, linked by veth pairs,
and in cgroups pinned to separate CPUs, then measures TCP relaying
(iperf3) and HTTP proxying (wrk) for 3proxy builds, nginx, haproxy and
the kernel forwarding alone, reporting throughput, latency and the
proxy's CPU time and peak memory per unit of work.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

CMakeLists.txt

@@ -63,7 +63,7 @@ option(3PROXY_USE_OPENSSL "Enable TLS/SSL support via OpenSSL (fallback when wol
 option(3PROXY_USE_PCRE2 "Enable PCRE2 regex filtering" ON)
 option(3PROXY_USE_PAM "Enable PAM/PamAuth" ON)
 option(3PROXY_USE_ODBC "Enable ODBC support (Unix only, always ON on Windows)" OFF)
-option(3PROXY_USE_SPLICE "Build Linux splice() support, slower than read/write for most traffic (Linux only)" OFF)
+option(3PROXY_USE_SPLICE "Build Linux splice() support, used by services given -s (Linux only)" ON)
 option(3PROXY_USE_POLL "Use poll() instead of select() (Unix only)" ON)
 option(3PROXY_USE_WSAPOLL "Use WSAPoll instead of select() (Windows only)" ON)
 option(3PROXY_USE_NETFILTER "Enable Linux netfilter support (Linux only)" ON)

Makefile.Linux

@@ -4,9 +4,9 @@
 # add -DWITH_ODBC to CFLAGS and -lodbc to LIBS to compile with ODBC
 # library support. Add -DSAFESQL for poorely written ODBC library / drivers.
 #
-# Linux splice() support is not built by default, it is slower than the
+# Linux splice() support is built, but used only by services given the -s
-# read/write path for most traffic. Add -DWITHSPLICE to CFLAGS to build it,
+# option: it is faster for large transfers and slower for small requests.
-# it must additionally be enabled per service with the -s option.
+# Remove -DWITHSPLICE from CFLAGS to build without it.
 
 BUILDDIR = ../bin/
 PREFIX ?= 3proxy_
@@ -14,7 +14,7 @@ CRYPT_PREFIX ?= $(PREFIX)
 CC ?= gcc
 
 CFLAGS ?= -O3 -flto
-CFLAGS += -fno-strict-aliasing -c -pthread -D_GNU_SOURCE -DGETHOSTBYNAME_R -D_THREAD_SAFE -D_REENTRANT -DFD_SETSIZE=4096 -DWITH_POLL -DWITH_NETFILTER -D WITH_UN
+CFLAGS += -fno-strict-aliasing -c -pthread -DWITHSPLICE -D_GNU_SOURCE -DGETHOSTBYNAME_R -D_THREAD_SAFE -D_REENTRANT -DFD_SETSIZE=4096 -DWITH_POLL -DWITH_NETFILTER -D WITH_UN
 COUT = -o 
 LN ?= ${CC}
 DCFLAGS ?= -fPIC

bench/.gitignore

@@ -0,0 +1,2 @@
+bin/
+results/

bench/README.md

@@ -0,0 +1,97 @@
+# Benchmarks
+
+Compares the speed and the cost of 3proxy versions, and of other proxies doing
+the same job, on Linux.
+
+## How the measurement is isolated
+
+The client, the proxy and the origin each run in a network namespace of
+their own, linked by veth pairs:
+
+```
+[bcli] 10.0.1.2 --veth-- 10.0.1.1 [bprx] 10.0.2.1 --veth-- 10.0.2.2 [bsrv]
+ wrk, iperf3              the proxy              nginx (files), iperf3 -s
+```
+
+so they share no loopback, and a packet crosses the same path whichever proxy
+is measured. Each role also runs in a cgroup of its own pinned to separate
+CPUs (`--cpus`, default `cli=0-3,prx=4-5,srv=6-7`), so one does not take CPU
+from another, and RPS steers what each veth receives to the receiver's CPUs.
+The proxy's cgroup is created anew for every run, which is what makes its
+CPU time and peak memory readable on their own.
+
+Every proxy is given the same CPUs: nginx gets as many workers and haproxy as
+many threads as the proxy cgroup has CPUs; 3proxy runs a thread per
+connection inside the same cpuset. Logging is off everywhere.
+
+`none` is no proxy at all: the client reaches the origin through the proxy
+namespace with the kernel forwarding, the upper bound for every scenario.
+
+## What is reported
+
+For every run, in a CSV under `bench/results/`:
+
+| column | meaning |
+|---|---|
+| `gbit`, `rate` | throughput, requests per second for HTTP |
+| `p50_ms`, `p99_ms` | latency from wrk (closed loop: compare at equal load only) |
+| `prx_cpu_s` | CPU seconds the proxy used, all its threads and processes |
+| `cpu_s_per_gb`, `cpu_us_per_req` | the proxy's cost per unit of work: the fairest figure, least affected by which side was the limit |
+| `peak_mb` | the proxy's peak memory |
+| `cli_util`, `prx_util`, `srv_util` | how busy each role's CPUs were: a client or origin near 100% means the result says nothing about the proxy |
+| `errors`, `retrans` | socket errors and non-2xx answers; TCP retransmissions in the stream scenarios |
+
+Repetitions rotate the order of the proxies, so drift over time (heat, the
+host) falls on all of them alike; the summary gives medians.
+
+## Scenarios
+
+| name | load |
+|---|---|
+| `stream1`, `stream1-down` | one iperf3 stream through a TCP relay (3proxy `tcppm`, nginx `stream`, haproxy `mode tcp`), upload and download |
+| `stream16` | sixteen streams |
+| `http-ka-1k`, `http-ka-1m` | HTTP over kept-alive connections through an HTTP proxy (absolute URIs), 1 KB and 1 MB answers |
+| `http-close-1k` | a new connection for every request |
+
+nginx is not a forward proxy: it answers absolute URIs by passing them to its
+upstream, which is the origin here, and it has no CONNECT or SOCKS, so only
+these scenarios compare like with like.
+
+## Running
+
+Root, `iproute2`, `iperf3`, `wrk`, `nginx` (with the stream module:
+`libnginx-mod-stream` on Debian and Ubuntu) and, to compare with it,
+`haproxy`.
+
+```sh
+bench/build.sh 0.9.9.1 1.0.1                      # tags into bench/bin/
+NAME=devel bench/build.sh .                       # the working tree
+CC="gcc -fcommon" bench/build.sh 0.8.13           # before 0.9, newer gcc
+
+sudo bench/bench.py \
+    --proxy none \
+    --proxy 3proxy:bench/bin/3proxy-1.0.1 \
+    --proxy 3proxy:bench/bin/3proxy-devel \
+    --proxy "3proxy:bench/bin/3proxy-0.9.4:-s0" \
+    --proxy nginx --proxy haproxy
+```
+
+After the binary, a 3proxy entry can carry options for both its services:
+`-s0` keeps 0.9.0 to 0.9.8, which use splice() by default, from using it, and
+`-ocTCP_NODELAY -osTCP_NODELAY` turns Nagle's algorithm off on the client and
+server sockets.
+
+`--scenario` picks scenarios, `--reps` and `--duration` set the repetitions
+and their length, `--netem "delay 1ms rate 10gbit"` puts a slower, longer link
+between the client and the proxy, `--mtu` changes the links' MTU.
+
+## Caveats
+
+* A virtual machine cannot pin its virtual CPUs to physical ones, so its
+  absolute numbers move between sessions: compare within one session, and
+  keep absolute figures for real hardware.
+* wrk measures latency in a closed loop, so a slower proxy is also offered
+  less load; compare latencies only between runs of similar throughput.
+* Versions are built with the Makefile they shipped with, so compiler flags
+  differ between them (0.8 builds with `-O2`, 0.9.9 and later with
+  `-O3 -flto`) as they did for their users.

bench/bench.py

@@ -0,0 +1,575 @@
+#!/usr/bin/env python3
+"""Compares the speed and the cost of proxies on Linux: 3proxy versions, and
+other servers doing the same job.
+
+The client, the proxy and the origin each run in a network namespace of their
+own, linked by veth pairs, and in a cgroup of their own pinned to separate
+CPUs, so they neither share a loopback nor take CPU from each other, and the
+proxy's CPU time and memory can be read on their own. See README.md.
+
+Needs root, iproute2, iperf3, wrk and nginx (the origin); haproxy only when
+it is one of the proxies compared.
+
+    sudo bench/bench.py --proxy 3proxy:bench/bin/3proxy-1.0.1 \\
+        --proxy 3proxy:bench/bin/3proxy-devel --proxy nginx --proxy none
+"""
+
+import argparse
+import csv
+import datetime
+import json
+import os
+import re
+import resource
+import shutil
+import signal
+import statistics
+import subprocess
+import sys
+import tempfile
+import time
+
+CG = "/sys/fs/cgroup/3proxy-bench"
+
+# client 10.0.1.2 -- 10.0.1.1 proxy 10.0.2.1 -- 10.0.2.2 origin
+CLI_ADDR, PRX_IN, PRX_OUT, SRV_ADDR = "10.0.1.2", "10.0.1.1", "10.0.2.1", "10.0.2.2"
+HTTP_PORT, TCP_PORT, ORIGIN_HTTP, ORIGIN_TCP = 3128, 5201, 8080, 5201
+
+FILES = {"1k": 1024, "100k": 100 * 1024, "1m": 1024 * 1024}
+
+# name: (kind, parameters)
+SCENARIOS = {
+    "stream1":       ("stream", {"streams": 1}),
+    "stream16":      ("stream", {"streams": 16}),
+    "stream1-down":  ("stream", {"streams": 1, "reverse": True}),
+    "http-ka-1k":    ("http", {"file": "1k", "conns": 64}),
+    "http-ka-1m":    ("http", {"file": "1m", "conns": 16}),
+    "http-close-1k": ("http", {"file": "1k", "conns": 64, "close": True}),
+}
+
+
+def sh(cmd, check=True, **kw):
+    return subprocess.run(cmd, shell=True, check=check, text=True,
+                          stdout=subprocess.PIPE, stderr=subprocess.STDOUT, **kw).stdout
+
+
+def cpulist(spec):
+    cpus = []
+    for part in spec.split(","):
+        a, _, b = part.partition("-")
+        cpus.extend(range(int(a), int(b or a) + 1))
+    return cpus
+
+
+def cpumask(spec):
+    return "%x" % sum(1 << c for c in cpulist(spec))
+
+
+# --- namespaces --------------------------------------------------------------
+
+def net_up(args):
+    net_down()
+    for ns in ("bcli", "bprx", "bsrv"):
+        sh(f"ip netns add {ns}")
+        sh(f"ip -n {ns} link set lo up")
+    sh("ip link add bc0 netns bcli type veth peer name bp0 netns bprx")
+    sh("ip link add bp1 netns bprx type veth peer name bs0 netns bsrv")
+    for ns, dev, addr in (("bcli", "bc0", CLI_ADDR), ("bprx", "bp0", PRX_IN),
+                          ("bprx", "bp1", PRX_OUT), ("bsrv", "bs0", SRV_ADDR)):
+        sh(f"ip -n {ns} addr add {addr}/24 dev {dev}")
+        sh(f"ip -n {ns} link set {dev} mtu {args.mtu} up")
+    # the direct baseline goes through the proxy namespace, routed by the
+    # kernel
+    sh(f"ip -n bcli route add 10.0.2.0/24 via {PRX_IN}")
+    sh(f"ip -n bsrv route add 10.0.1.0/24 via {PRX_OUT}")
+    sh("ip netns exec bprx sysctl -qw net.ipv4.ip_forward=1")
+    for ns in ("bcli", "bprx", "bsrv"):
+        sh(f"ip netns exec {ns} sysctl -qw net.core.somaxconn=65535 "
+           "net.ipv4.tcp_max_syn_backlog=65535 net.ipv4.tcp_tw_reuse=1 "
+           "net.ipv4.ip_local_port_range='1024 65535'")
+    # A veth hands what it receives to the CPU that sent it; steer it to the
+    # receiver's own CPUs instead.
+    for ns, dev, role in (("bcli", "bc0", "cli"), ("bprx", "bp0", "prx"),
+                          ("bprx", "bp1", "prx"), ("bsrv", "bs0", "srv")):
+        sh(f"ip netns exec {ns} sh -c 'echo {cpumask(args.cpus[role])} "
+           f"> /sys/class/net/{dev}/queues/rx-0/rps_cpus'", check=False)
+    if args.netem:
+        for ns, dev in (("bcli", "bc0"), ("bprx", "bp0")):
+            sh(f"ip netns exec {ns} tc qdisc add dev {dev} root netem {args.netem}")
+
+
+def net_down():
+    for ns in ("bcli", "bprx", "bsrv"):
+        sh(f"ip netns del {ns}", check=False)
+
+
+# --- cgroups -----------------------------------------------------------------
+
+def cg_write(path, value):
+    with open(path, "w") as f:
+        f.write(value)
+
+
+def cg_read(path):
+    with open(path) as f:
+        return f.read()
+
+
+def cg_up(args):
+    os.makedirs(CG, exist_ok=True)
+    cg_write("/sys/fs/cgroup/cgroup.subtree_control", "+cpuset +cpu +memory")
+    cg_write(f"{CG}/cgroup.subtree_control", "+cpuset +cpu +memory")
+    for role in ("cli", "srv"):
+        cg_make(role, args.cpus[role])
+
+
+def cg_make(role, cpus):
+    path = f"{CG}/{role}"
+    os.makedirs(path, exist_ok=True)
+    cg_write(f"{path}/cpuset.cpus", cpus)
+    return path
+
+
+def cg_remove(role):
+    path = f"{CG}/{role}"
+    if not os.path.isdir(path):
+        return
+    for _ in range(50):
+        try:
+            os.rmdir(path)
+            return
+        except OSError:
+            time.sleep(0.1)
+
+
+def cg_down():
+    for role in ("cli", "prx", "srv"):
+        cg_remove(role)
+    try:
+        os.rmdir(CG)
+    except OSError:
+        pass
+
+
+def cg_usage(role):
+    """CPU seconds used so far by everything in the cgroup."""
+    for line in cg_read(f"{CG}/{role}/cpu.stat").splitlines():
+        name, value = line.split()
+        if name == "usage_usec":
+            return int(value) / 1e6
+    return 0.0
+
+
+def cg_peak(role):
+    try:
+        return int(cg_read(f"{CG}/{role}/memory.peak")) / 2**20
+    except OSError:
+        return float("nan")
+
+
+# --- processes ---------------------------------------------------------------
+
+def spawn(ns, role, argv, log):
+    """Start a process in a namespace and a cgroup; threads it starts stay
+    there with it."""
+    procs = f"{CG}/{role}/cgroup.procs"
+
+    def enter():
+        cg_write(procs, str(os.getpid()))
+        resource.setrlimit(resource.RLIMIT_NOFILE, (1048576, 1048576))
+        os.setsid()
+
+    return subprocess.Popen(["ip", "netns", "exec", ns] + argv, stdout=log,
+                            stderr=subprocess.STDOUT, preexec_fn=enter)
+
+
+def run_in(ns, role, argv, timeout):
+    p = spawn(ns, role, argv, subprocess.PIPE)
+    out, _ = p.communicate(timeout=timeout)
+    return out.decode("utf-8", "replace")
+
+
+def stop(p):
+    if p and p.poll() is None:
+        try:
+            os.killpg(p.pid, signal.SIGTERM)
+            p.wait(timeout=5)
+        except (ProcessLookupError, subprocess.TimeoutExpired):
+            try:
+                os.killpg(p.pid, signal.SIGKILL)
+            except ProcessLookupError:
+                pass
+            p.wait()
+
+
+def wait_port(ns, addr, port, timeout=10):
+    deadline = time.time() + timeout
+    while time.time() < deadline:
+        # /dev/tcp is bash's
+        if subprocess.run(["ip", "netns", "exec", ns, "bash", "-c",
+                           f"exec 3<>/dev/tcp/{addr}/{port}"],
+                          stderr=subprocess.DEVNULL).returncode == 0:
+            return True
+        time.sleep(0.1)
+    return False
+
+
+# --- the origin --------------------------------------------------------------
+
+def origin_up(args, work):
+    www = os.path.join(work, "www")
+    os.makedirs(www, exist_ok=True)
+    for name, size in FILES.items():
+        with open(os.path.join(www, name), "wb") as f:
+            f.write(b"x" * size)
+    n = len(cpulist(args.cpus["srv"]))
+    conf = os.path.join(work, "origin.conf")
+    with open(conf, "w") as f:
+        f.write(f"""daemon off;
+worker_processes {n};
+pid {work}/origin.pid;
+error_log {work}/origin.err;
+worker_rlimit_nofile 1048576;
+events {{ worker_connections 65536; }}
+http {{
+    access_log off;
+    sendfile on;
+    tcp_nopush on;
+    keepalive_requests 1000000;
+    keepalive_timeout 120s;
+    server {{
+        listen {SRV_ADDR}:{ORIGIN_HTTP} backlog=65535 reuseport;
+        root {www};
+        default_type application/octet-stream;
+    }}
+}}
+""")
+    log = open(os.path.join(work, "origin.out"), "w")
+    procs = [spawn("bsrv", "srv", ["nginx", "-c", conf, "-p", work], log),
+             spawn("bsrv", "srv", ["iperf3", "-s", "-B", SRV_ADDR, "-p", str(ORIGIN_TCP)], log)]
+    if not (wait_port("bsrv", SRV_ADDR, ORIGIN_HTTP) and wait_port("bsrv", SRV_ADDR, ORIGIN_TCP)):
+        sys.exit("the origin did not start, see " + work)
+    return procs
+
+
+# --- proxies -----------------------------------------------------------------
+
+def proxy_conf(kind, work, ncpu, label, opts=""):
+    """Configuration for one proxy: an HTTP proxy on HTTP_PORT and a TCP relay
+    on TCP_PORT, both towards the origin. Returns the argv. opts are added to
+    both 3proxy services, e.g. -s0 to keep a version from using splice()."""
+    if kind == "3proxy":
+        conf = os.path.join(work, f"{label}.cfg")
+        with open(conf, "w") as f:
+            f.write(f"""maxconn 100000
+auth none
+proxy {opts} -i{PRX_IN} -e{PRX_OUT} -p{HTTP_PORT}
+tcppm {opts} -i{PRX_IN} -e{PRX_OUT} {TCP_PORT} {SRV_ADDR} {ORIGIN_TCP}
+""")
+        return [conf]
+    if kind == "nginx":
+        conf = os.path.join(work, f"{label}.conf")
+        with open(conf, "w") as f:
+            # distributions build the stream module as a dynamic one
+            stream = "/usr/lib/nginx/modules/ngx_stream_module.so"
+            load = f"load_module {stream};\n" if os.path.exists(stream) else ""
+            f.write(f"""{load}daemon off;
+worker_processes {ncpu};
+pid {work}/{label}.pid;
+error_log {work}/{label}.err;
+worker_rlimit_nofile 1048576;
+events {{ worker_connections 65536; }}
+http {{
+    access_log off;
+    upstream origin {{ server {SRV_ADDR}:{ORIGIN_HTTP}; keepalive 1024; }}
+    server {{
+        listen {PRX_IN}:{HTTP_PORT} backlog=65535 reuseport;
+        keepalive_requests 1000000;
+        location / {{
+            proxy_pass http://origin;
+            proxy_http_version 1.1;
+            proxy_set_header Connection "";
+            proxy_bind {PRX_OUT};
+        }}
+    }}
+}}
+stream {{
+    server {{
+        listen {PRX_IN}:{TCP_PORT} backlog=65535 reuseport;
+        proxy_pass {SRV_ADDR}:{ORIGIN_TCP};
+        proxy_bind {PRX_OUT};
+    }}
+}}
+""")
+        return ["-c", conf, "-p", work]
+    if kind == "haproxy":
+        conf = os.path.join(work, f"{label}.cfg")
+        with open(conf, "w") as f:
+            f.write(f"""global
+    nbthread {ncpu}
+    maxconn 200000
+defaults
+    timeout connect 5s
+    timeout client 60s
+    timeout server 60s
+frontend http
+    mode http
+    bind {PRX_IN}:{HTTP_PORT}
+    option http-keep-alive
+    default_backend origin
+backend origin
+    mode http
+    http-reuse always
+    source {PRX_OUT}
+    server origin {SRV_ADDR}:{ORIGIN_HTTP}
+listen tcp
+    mode tcp
+    bind {PRX_IN}:{TCP_PORT}
+    source {PRX_OUT}
+    server origin {SRV_ADDR}:{ORIGIN_TCP}
+""")
+        return ["-f", conf]
+    raise ValueError(kind)
+
+
+class Proxy:
+    def __init__(self, spec):
+        kind, _, path = spec.partition(":")
+        self.kind = kind
+        self.opts = ""
+        if kind == "3proxy":
+            path, _, self.opts = path.partition(":")
+            if not path:
+                sys.exit("--proxy 3proxy:<binary>[:<service options>]")
+            self.binary = os.path.abspath(path)
+            self.label = os.path.basename(path) + (self.opts.replace(" ", "") if self.opts else "")
+        elif kind in ("nginx", "haproxy"):
+            self.binary = path or shutil.which(kind)
+            self.label = kind
+        elif kind == "none":
+            self.binary = None
+            self.label = "direct"
+        else:
+            sys.exit("unknown proxy " + spec)
+
+    def start(self, args, work):
+        cg_remove("prx")
+        cg_make("prx", args.cpus["prx"])
+        if self.kind == "none":
+            return None
+        argv = [self.binary] + proxy_conf(self.kind, work, len(cpulist(args.cpus["prx"])),
+                                          self.label, self.opts)
+        log = open(os.path.join(work, self.label + ".out"), "a")
+        p = spawn("bprx", "prx", argv, log)
+        if not (wait_port("bcli", PRX_IN, HTTP_PORT) and wait_port("bcli", PRX_IN, TCP_PORT)):
+            stop(p)
+            sys.exit(f"{self.label} did not start, see {work}")
+        return p
+
+
+# --- load --------------------------------------------------------------------
+
+WRK_SCRIPT = """
+local path, close = "%s", %s
+local headers = {["Host"] = "%s:%d"}
+if close then headers["Connection"] = "close" end
+local req = wrk.format("GET", path, headers)
+request = function() return req end
+"""
+
+UNITS = {"": 1, "k": 1e3, "K": 1e3, "M": 1e6, "G": 1e9, "KB": 2**10, "MB": 2**20,
+         "GB": 2**30, "B": 1}
+
+
+def to_ms(text):
+    m = re.match(r"([\d.]+)(us|ms|s|m)", text)
+    v, u = float(m.group(1)), m.group(2)
+    return v * {"us": 1e-3, "ms": 1, "s": 1e3, "m": 6e4}[u]
+
+
+def run_http(proxy, params, args, work):
+    direct = proxy.kind == "none"
+    host = SRV_ADDR if direct else PRX_IN
+    port = ORIGIN_HTTP if direct else HTTP_PORT
+    path = "/" + params["file"]
+    if not direct:
+        path = f"http://{SRV_ADDR}:{ORIGIN_HTTP}{path}"
+    script = os.path.join(work, "wrk.lua")
+    with open(script, "w") as f:
+        f.write(WRK_SCRIPT % (path, "true" if params.get("close") else "false",
+                              SRV_ADDR, ORIGIN_HTTP))
+    threads = len(cpulist(args.cpus["cli"]))
+    conns = max(params["conns"], threads)
+    out = run_in("bcli", "cli", ["wrk", "-t", str(threads), "-c", str(conns),
+                                 "-d", f"{args.duration}s", "--latency", "-s", script,
+                                 f"http://{host}:{port}/"], args.duration + 30)
+    res = {"raw": out}
+    m = re.search(r"(\d+) requests in", out)
+    res["requests"] = int(m.group(1)) if m else 0
+    m = re.search(r"Requests/sec:\s+([\d.]+)", out)
+    res["rate"] = float(m.group(1)) if m else 0.0
+    m = re.search(r"Transfer/sec:\s+([\d.]+)(\w+)", out)
+    res["gbit"] = float(m.group(1)) * UNITS[m.group(2)] * 8 / 1e9 if m else 0.0
+    for pct in ("50", "99"):
+        m = re.search(rf"^\s+{pct}%\s+(\S+)", out, re.M)
+        res[f"p{pct}_ms"] = to_ms(m.group(1)) if m else float("nan")
+    errors = 0
+    m = re.search(r"Socket errors: connect (\d+), read (\d+), write (\d+), timeout (\d+)", out)
+    if m:
+        errors += sum(int(x) for x in m.groups())
+    m = re.search(r"Non-2xx or 3xx responses: (\d+)", out)
+    if m:
+        errors += int(m.group(1))
+    res["errors"] = errors
+    res["retrans"] = 0
+    res["bytes"] = res["gbit"] * 1e9 / 8 * args.duration
+    return res
+
+
+def run_stream(proxy, params, args, work):
+    direct = proxy.kind == "none"
+    host = SRV_ADDR if direct else PRX_IN
+    port = ORIGIN_TCP if direct else TCP_PORT
+    argv = ["iperf3", "-c", host, "-p", str(port), "-t", str(args.duration),
+            "-P", str(params["streams"]), "-J"]
+    if params.get("reverse"):
+        argv.append("-R")
+    out = run_in("bcli", "cli", argv, args.duration + 30)
+    res = {"raw": out, "rate": float("nan"), "p50_ms": float("nan"),
+           "p99_ms": float("nan"), "requests": 0, "errors": 0, "retrans": 0}
+    try:
+        j = json.loads(out)
+        s = j["end"]["sum_received"]
+        res["gbit"] = s["bits_per_second"] / 1e9
+        res["bytes"] = s["bytes"]
+        res["retrans"] = j["end"].get("sum_sent", {}).get("retransmits", 0)
+        if "error" in j:
+            res["errors"] = 1
+    except (ValueError, KeyError):
+        res["gbit"], res["bytes"], res["errors"] = 0.0, 0, 1
+    return res
+
+
+def measure(proxy, scenario, args, work):
+    kind, params = SCENARIOS[scenario]
+    p = proxy.start(args, work)
+    try:
+        time.sleep(0.5)
+        before = {r: cg_usage(r) for r in ("cli", "prx", "srv")}
+        t0 = time.time()
+        res = (run_http if kind == "http" else run_stream)(proxy, params, args, work)
+        wall = time.time() - t0
+        after = {r: cg_usage(r) for r in ("cli", "prx", "srv")}
+        res["peak_mb"] = cg_peak("prx")
+    finally:
+        stop(p)
+    for r in ("cli", "prx", "srv"):
+        used = after[r] - before[r]
+        res[f"{r}_cpu_s"] = used
+        # share of the CPUs given to that role, to see which side was the limit
+        res[f"{r}_util"] = used / (wall * len(cpulist(args.cpus[r])))
+    gb = res["bytes"] / 1e9
+    res["cpu_s_per_gb"] = res["prx_cpu_s"] / gb if gb else float("nan")
+    res["cpu_us_per_req"] = (res["prx_cpu_s"] * 1e6 / res["requests"]
+                             if res["requests"] else float("nan"))
+    return res
+
+
+# --- main --------------------------------------------------------------------
+
+FIELDS = ["proxy", "scenario", "rep", "gbit", "rate", "p50_ms", "p99_ms", "errors", "retrans",
+          "prx_cpu_s", "cpu_s_per_gb", "cpu_us_per_req", "peak_mb",
+          "cli_util", "prx_util", "srv_util"]
+
+
+def summary(rows):
+    keys = []
+    for r in rows:
+        if (r["proxy"], r["scenario"]) not in keys:
+            keys.append((r["proxy"], r["scenario"]))
+    cols = ["gbit", "rate", "p99_ms", "cpu_s_per_gb", "cpu_us_per_req", "peak_mb",
+            "prx_util", "cli_util", "srv_util", "errors"]
+    print("\nmedians (" + ", ".join(cols) + ")")
+    print("%-24s %-14s " % ("proxy", "scenario") + " ".join("%10s" % c[:10] for c in cols))
+    for proxy, scenario in sorted(keys, key=lambda k: (k[1], k[0])):
+        sel = [r for r in rows if r["proxy"] == proxy and r["scenario"] == scenario]
+        vals = []
+        for c in cols:
+            xs = [r[c] for r in sel if r[c] == r[c]]
+            vals.append("%10.3g" % statistics.median(xs) if xs else "%10s" % "-")
+        print("%-24s %-14s " % (proxy, scenario) + " ".join(vals))
+
+
+def main():
+    ap = argparse.ArgumentParser(description=__doc__.split("\n\n")[0])
+    ap.add_argument("--proxy", action="append", required=True,
+                    help="3proxy:<binary>[:<service options>], nginx[:<binary>], haproxy[:<binary>] "
+                         "or none (the kernel routing, an upper bound); repeat")
+    ap.add_argument("--scenario", action="append", choices=sorted(SCENARIOS),
+                    help="default: all")
+    ap.add_argument("--reps", type=int, default=3)
+    ap.add_argument("--duration", type=int, default=10, help="seconds per run")
+    ap.add_argument("--cpus", default="cli=0-3,prx=4-5,srv=6-7",
+                    help="CPUs per role (default %(default)s)")
+    ap.add_argument("--mtu", type=int, default=1500)
+    ap.add_argument("--netem", help='netem on the client link, e.g. "delay 1ms rate 10gbit"')
+    ap.add_argument("--out", default="bench/results", help="directory for the CSV and logs")
+    args = ap.parse_args()
+    if os.geteuid():
+        sys.exit("needs root")
+    args.cpus = dict(x.split("=") for x in args.cpus.split(","))
+    proxies = [Proxy(s) for s in args.proxy]
+    scenarios = args.scenario or list(SCENARIOS)
+
+    stamp = datetime.datetime.now().strftime("%Y%m%d-%H%M%S")
+    os.makedirs(args.out, exist_ok=True)
+    work = tempfile.mkdtemp(prefix="3proxy-bench-")
+    os.chmod(work, 0o755)
+    csvpath = os.path.join(args.out, f"{stamp}.csv")
+    rawpath = os.path.join(args.out, f"{stamp}.raw.txt")
+    with open(os.path.join(args.out, f"{stamp}.env.txt"), "w") as f:
+        f.write(" ".join(sys.argv) + "\n")
+        f.write(sh("uname -a; lscpu | head -20; nproc; "
+                   "cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor 2>/dev/null; "
+                   "iperf3 --version | head -1; wrk -v 2>&1 | head -1; nginx -v 2>&1; "
+                   "haproxy -v 2>/dev/null | head -1", check=False))
+
+    rows = []
+    origin = []
+    try:
+        net_up(args)
+        cg_up(args)
+        origin = origin_up(args, work)
+        with open(csvpath, "w", newline="") as f, open(rawpath, "w") as raw:
+            w = csv.DictWriter(f, FIELDS, extrasaction="ignore")
+            w.writeheader()
+            # Every repetition runs each proxy once, rotating the order, so a
+            # drift over time is shared by all of them.
+            for rep in range(args.reps):
+                for scenario in scenarios:
+                    order = proxies[rep % len(proxies):] + proxies[:rep % len(proxies)]
+                    for proxy in order:
+                        res = measure(proxy, scenario, args, work)
+                        res.update(proxy=proxy.label, scenario=scenario, rep=rep)
+                        rows.append(res)
+                        w.writerow(res)
+                        f.flush()
+                        raw.write(f"=== {proxy.label} {scenario} {rep}\n{res['raw']}\n")
+                        print("%-24s %-14s rep %d: %7.2f Gbit/s %10.0f req/s  proxy cpu %5.2fs  "
+                              "util cli %3.0f%% prx %3.0f%% srv %3.0f%%  errors %d" % (
+                                  proxy.label, scenario, rep, res["gbit"],
+                                  res["rate"] if res["rate"] == res["rate"] else 0,
+                                  res["prx_cpu_s"], res["cli_util"] * 100,
+                                  res["prx_util"] * 100, res["srv_util"] * 100,
+                                  res["errors"]), flush=True)
+    finally:
+        for p in origin:
+            stop(p)
+        cg_down()
+        net_down()
+    summary(rows)
+    print(f"\n{csvpath}\nlogs and configurations: {work}")
+
+
+if __name__ == "__main__":
+    main()

bench/build.sh

@@ -0,0 +1,52 @@
+#!/bin/sh
+# Builds 3proxy versions for comparison, each from a clean tree and with the
+# Makefile it shipped with, into bench/bin/3proxy-<name>.
+#
+#   bench/build.sh 0.9.9.1 1.0.1 devel     git refs (tags, branches, commits)
+#   bench/build.sh .                       the working tree, uncommitted
+#                                          changes included, as "worktree"
+#   NAME=devel-splice EXTRA_CFLAGS=-DWITHSPLICE bench/build.sh devel
+#   CC="gcc -fcommon" bench/build.sh 0.8.13   old Makefiles set CFLAGS
+#                                          outright, so a flag a newer
+#                                          compiler needs goes with CC
+#
+# Run from anywhere inside the repository.
+
+set -e
+
+top=$(git rev-parse --show-toplevel)
+out="$top/bench/bin"
+work="${TMPDIR:-/tmp}/3proxy-bench-src"
+mkdir -p "$out" "$work"
+
+for ref in "$@"; do
+	if [ "$ref" = "." ]; then
+		name=${NAME:-worktree}
+		src="$work/$name"
+		rm -rf "$src"
+		mkdir -p "$src"
+		# tracked and untracked files as they are now, nothing ignored
+		(cd "$top" && git ls-files -co --exclude-standard -z |
+			xargs -0 sh -c 'for f; do [ -f "$f" ] && printf "%s\0" "$f"; done' sh |
+			tar cf - --null -T - ) | (cd "$src" && tar xf -)
+	else
+		name=${NAME:-$ref}
+		src="$work/$name"
+		rm -rf "$src"
+		mkdir -p "$src"
+		(cd "$top" && git archive "$ref") | (cd "$src" && tar xf -)
+	fi
+	echo "== $name"
+	(
+		cd "$src"
+		mkdir -p bin
+		make -f Makefile.Linux CC="${CC:-gcc}" EXTRA_CFLAGS="$EXTRA_CFLAGS" >build.log 2>&1 ||
+			{ tail -20 build.log; exit 1; }
+	)
+	# versions before 0.9 leave the binary in src/
+	for b in "$src/bin/3proxy" "$src/src/3proxy"; do
+		[ -f "$b" ] && break
+	done
+	cp "$b" "$out/3proxy-$name"
+	echo "   $out/3proxy-$name"
+done

doc/html/highload.html

@@ -34,7 +34,8 @@ Each connected client requires:
 <ul>
 <li>1 thread (process)
 <li>2 sockets (file descriptors). For FTP, 4 sockets are required.
-<br>Up to 128K of kernel buffer memory. This is the theoretical maximum; actual numbers depend on connection quality and traffic amount.
+<br>With splice() (Linux, -s), 2 more pipes (file descriptors) = 4 file descriptors, 6 for FTP.
+<br>Up to 128K (up to 256K with splice()) of kernel buffer memory. This is the theoretical maximum; actual numbers depend on connection quality and traffic amount.
 <br>1 additional socket (file descriptor) during name resolution for non-cached names
 <br>1 additional socket during authentication or logging for RADIUS authentication or logging.
 <li>1 ephemeral port (3 ephemeral ports for FTP connections).
@@ -279,6 +280,8 @@ tuning anything else.
 
 If 3proxy is used in a VPS environment, there can be additional limitations.
 For example, kernel resources, system CPU usage, and IOCTLs can be limited differently, and this can become a bottleneck.
+splice() (see below) moves work into the kernel, so where the hosting limits kernel resources
+(seen as nearly 100% CPU usage without any real activity of the application) do not enable it.
 
 <h4>Extending the Ephemeral Port Range</h4>
 
@@ -641,17 +644,37 @@ monitor "/some/path/3proxy/3proxy.ver"
 e.g., with "touch /some/path/3proxy/3proxy.ver".
 </ol>
 
-<h4>Use TCP_NODELAY to Speed Up Connections with Small Amounts of Data</h4>
+<h4>TCP_NODELAY for Connections with Small Amounts of Data</h4>
 
-If most requests require an exchange with a small amount of data in both directions
+TCP_NODELAY is set by default on client (oc) and server (os)
-without the need for bandwidth, e.g., messengers or small web requests,
+connections: without it, Nagle's algorithm holds back a short write until the
-you can eliminate Nagle's algorithm delay with the TCP_NODELAY flag. Usage example:
+previous one is acknowledged, and a peer delays its acknowledgement, so a reply
+written in more than one part (e.g. HTTP headers, then a short body) waits tens
+of milliseconds. On slow connections with high delays, where the bandwidth is the
+bottleneck and fewer packets matter more than latency, it can be turned off:
 <pre>
-proxy -osTCP_NODELAY -ocTCP_NODELAY
+proxy -osTCP_NODELAY=0 -ocTCP_NODELAY=0
 </pre>
-sets TCP_NODELAY for client (oc) and server (os) connections.
+
-<p>Do not use TCP_NODELAY on slow connections with high delays when
+<h4>Use Splice to Speed Up Large Data Transfers</h4>
-connection bandwidth is a bottleneck.
+
+On Linux, splice() passes data between the client and the server connections
+through a kernel pipe, without copying it into the 3proxy process. Linux builds
+include it, but a service uses it only when given the -s option:
+<pre>
+proxy -s
+socks -s
+tcppm -s 8080 192.168.1.1 80
+</pre>
+-s0 turns it off explicitly. In builds without it (CMake option 3PROXY_USE_SPLICE=OFF,
+or -DWITHSPLICE removed from the Makefile) -s is accepted and ignored.
+<p>splice() pays off when most of the traffic is large transfers: in the
+<a href="https://github.com/3proxy/3proxy/tree/master/bench">benchmarks</a> it moved
+1.4 to 1.7 times more data than the read/write path at about half the CPU per gigabyte.
+It does not help small requests and short connections, which go slower with it, and
+every spliced connection needs two more pipes (file descriptors) and more kernel
+buffer memory. Data filters are not applied to spliced data.
+<p>TCP_NODELAY and splice() do not conflict and can be combined on high-speed connections.
 
 <h4>Add Grace Delay to Reduce System Calls</h4>
 
@@ -661,7 +684,7 @@ the minimal number of packets in the same direction to apply the algorithm,
 and the last value is the delay added after polling and prior to reading data.
 The example above adds a 10-millisecond delay before reading data if the average
 polling size is below 8000 bytes and 3 read operations have been made in the same
-direction. <pre>logdump 1 1</pre> is useful
+direction. It's especially useful with splice. <pre>logdump 1 1</pre> is useful
 to see how grace delays work; choose a delay value to avoid filling the read
 buffer (typically 64K) but keep the request sizes close to the chosen average
 on large file uploads/downloads.

man/3proxy.cfg.5

@@ -184,8 +184,10 @@ connect to given remote HOST:port instead of listening local connection on -p or
 .br
 .B -oc\fIOPTIONS\fB, -os\fIOPTIONS\fB, -ol\fIOPTIONS\fB, -or\fIOPTIONS\fB, -oR\fIOPTIONS\fR
 options for proxy-to-client (\fB-oc\fR), proxy-to-server (\fB-os\fR), proxy listening (\fB-ol\fR), connect back client (\fB-or\fR), connect back listening (\fB-oR\fR) sockets.
+\fIOPTIONS\fR is a comma separated list of \fINAME\fR or \fINAME\fR=\fIVALUE\fR; a name alone sets the option to 1 (TCP_MAXSEG to the value of \fBmaxseg\fR), and \fINAME\fR=0 turns it off. Options add to the defaults and to the options given earlier for the same socket. An unknown name or a value which is not a number is an error.
+TCP_NODELAY is set by default on proxy-to-client and proxy-to-server sockets, so a reply written in several parts is not delayed by Nagle's algorithm; use \fB-ocTCP_NODELAY=0\fR or \fB-osTCP_NODELAY=0\fR to turn it off, e.g. to send fewer packets on slow links.
 Options like TCP_CORK, TCP_NODELAY, TCP_DEFER_ACCEPT, TCP_QUICKACK, TCP_TIMESTAMPS, TCP_FASTOPEN, SO_REUSEADDR, SO_REUSEPORT, SO_EXCLUSIVEADDRUSE, SO_PORT_SCALABILITY, SO_REUSE_UNICASTPORT, SO_KEEPALIVE, SO_DONTROUTE may be supported depending on OS.
-SO_REUSEADDR and SO_REUSEPORT are set on the listening socket by default on Unix. On Windows SO_REUSEADDR is not set: it is not required to rebind a listening port and it only lets another local process bind the same address and port. Use SO_EXCLUSIVEADDRUSE (Windows) on the listening socket (\fB-ol\fR) to prevent that.
+SO_REUSEADDR and SO_REUSEPORT are set by default on the listening sockets (\fB-ol\fR, \fB-oR\fR) on Unix; \fB-olSO_REUSEPORT=0\fR turns one off. On Windows SO_REUSEADDR is not set: it is not required to rebind a listening port and it only lets another local process bind the same address and port. Use SO_EXCLUSIVEADDRUSE (Windows) on the listening socket (\fB-ol\fR) to prevent that.
 .br
 .B -H
 (for all services) Expect HAProxy PROXY protocol v1 header on incoming connection.
@@ -200,11 +202,13 @@ delay GRACE_DELAY milliseconds before polling if average polling size is below G
  (for admin) secure, allow only secure operations, currently only traffic counters
 view without ability to reset.
 .br
- (for TCP services, Linux) enable splice(). splice() is not built by default and
+ (for TCP services, Linux) use splice() to pass data between the client and the
-is disabled even when built, because current Linux does not implement
+server without copying it through 3proxy. It is off unless -s is given (-s0 turns
-SPLICE_F_MOVE, so no real zero-copy takes place and the read/write path is faster
+it off explicitly). splice() suits large transfers: they go faster and use less
-for most traffic. Rebuild with -DWITHSPLICE to make -s available, -s0 disables it
+CPU. Small requests and short connections go slower with it, every connection
-explicitly.
+needs two more pipes (file descriptors) and more kernel memory, and data filters
+are not applied to spliced data. Available in builds with WITHSPLICE, the default
+on Linux.
 .br
 .B -C
  (for TCP services) a connection closed by any of the sides terminates the

src/3proxy.c

@@ -74,13 +74,8 @@ void __stdcall CommandHandler( DWORD dwCommand )
         SetStatus( SERVICE_STOP_PENDING, 0, 1 );
 	conf.timetoexit = 1;
 	conf.paused++;
-	Sleep(2000);
+	/* ServiceMain() reports the service stopped once cyclestep() has
-        SetStatus( SERVICE_STOPPED, 0, 0 );
+	   seen this and the services are done */
-#ifdef WITH_ODBC
-	_3proxy_mutex_lock(&log_mutex);
-	close_sql();
-	_3proxy_mutex_unlock(&log_mutex);
-#endif
         break;
     case SERVICE_CONTROL_PAUSE:
         SetStatus( SERVICE_PAUSE_PENDING, 0, 1 );
@@ -106,6 +101,13 @@ void __stdcall ServiceMain(int argc, unsigned char* argv[] )
     SetStatus( SERVICE_START_PENDING, 0, 1 );
     SetStatus( SERVICE_RUNNING, 0, 0 );
     cyclestep();
+#ifdef WITH_ODBC
+    _3proxy_mutex_lock(&log_mutex);
+    close_sql();
+    _3proxy_mutex_unlock(&log_mutex);
+#endif
+    /* the last thing: the process may be ended once this is reported */
+    SetStatus( SERVICE_STOPPED, 0, 0 );
 }
 #endif
 
@@ -240,6 +242,39 @@ void dumpcounters(struct trafcount *tlin, int counterd){
  }
 }
 
+/* Lets the services finish before the process exits, for EXITWAIT ms at
+   most: each one waits for its connections, and a connection may hang on
+   its peer. Posts left over from reloads are consumed on the way, the
+   count decides. */
+#define EXITWAIT 3000
+static unsigned long nowms(void){
+#ifdef _WIN32
+ return (unsigned long)GetTickCount();
+#else
+ struct timeval tv;
+
+ gettimeofday(&tv, NULL);
+ return (unsigned long)tv.tv_sec * 1000 + tv.tv_usec / 1000;
+#endif
+}
+
+static void waitservices(void){
+ unsigned long start = nowms(), passed;
+
+ for(;;){
+	int n;
+
+	_3proxy_mutex_lock(&runningservices_mutex);
+	n = runningservices;
+	_3proxy_mutex_unlock(&runningservices_mutex);
+	if(!n) return;
+	/* a clock set back makes this huge, which ends the wait as well */
+	passed = nowms() - start;
+	if(passed >= EXITWAIT) return;
+	if(_3proxy_sem_timedlock(serviceexited, (unsigned)(EXITWAIT - passed))) return;
+ }
+}
+
 void cyclestep(void){
  struct tm *tm;
  time_t minutecounter;
@@ -336,9 +371,7 @@ void cyclestep(void){
 	if(conf.timetoexit){
 		conf.paused++;
 		doschedule();
-		usleep(SLEEPTIME*999);
+		waitservices();
-		usleep(SLEEPTIME*999);
-		usleep(SLEEPTIME*999);
 		return;
 	}
 		
@@ -517,6 +550,7 @@ int WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int
   }
 
   _3proxy_mutex_init(&config_mutex);
+  _3proxy_mutex_init(&runningservices_mutex);
   _3proxy_mutex_init(&bandlim_mutex);
   _3proxy_mutex_init(&connlim_mutex);
   _3proxy_mutex_init(&tc_mutex);
@@ -524,7 +558,7 @@ int WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int
 #ifndef NORADIUS
   _3proxy_mutex_init(&rad_mutex);
 #endif
-  if(_3proxy_sem_init(conf.threadinit, 1, 1)){
+  if(_3proxy_sem_init(conf.threadinit, 1, 1) || _3proxy_sem_init_timed(serviceexited, 0, 0x7fffffff)){
     fprintf(stderr, "semaphore init failed\n");
     return 1;
   }

src/common.c

@@ -387,7 +387,6 @@ int
 	return shutdown(s, how);
     }
     int WINAPI def_closesocket(void* state, SOCKET s){
-	usleep(SLEEPTIME);
 	return closesocket(s);
     }
 #else
@@ -715,7 +714,9 @@ int doconnect(struct clientparam * param){
 	if(param->srv->so._getpeername(param->sostate, param->remsock, (struct sockaddr *)&param->sinsr, &size)==-1) {return (14);}
  }
  else {
+#ifndef _WIN32
 	struct linger lg = {1,conf.timeouts[LINGER_TO]};
+#endif
 	int tries = RANGETRIES;
 
 	if(SAISNULL(&param->sinsr)){
@@ -745,9 +746,12 @@ int doconnect(struct clientparam * param){
 			param->sinsl = param->srv->extsa;
 	}
 	*SAPORT(&param->sinsl) = 0;
-	setopts(param->remsock, param->srv->srvsockopts);
+	setopts(param->remsock, &param->srv->srvsockopts);
 
+#ifndef _WIN32
+	/* not on Windows, see the accepting side in proxymain.c */
 	param->srv->so._setsockopt(param->sostate, param->remsock, SOL_SOCKET, SO_LINGER, (char *)&lg, sizeof(lg));
+#endif
 	if(extbindtodevice(param, param->remsock)) return 12;
 #ifdef WITH_UN
 	if(*SAFAMILY(&param->sinsl) != AF_UNIX)

src/conf.c

@@ -38,6 +38,9 @@ _3proxy_mutex_t bandlim_mutex;
 _3proxy_mutex_t connlim_mutex;
 _3proxy_mutex_t tc_mutex;
 _3proxy_mutex_t config_mutex;
+int runningservices = 0;
+_3proxy_mutex_t runningservices_mutex;
+_3proxy_sem_t serviceexited;
 
 int haveerror = 0;
 int linenum = 0;
@@ -76,7 +79,18 @@ DWORD WINAPI startsrv(LPVOID data) {
 void * startsrv(void * data) {
 #endif
   struct child *d = (struct child *)data;
+
+  /* counted here rather than where the service is listed, so every way
+     out of it is counted too; start_proxy_thread() waits for the service
+     to start, so it is counted by the time that returns */
+  _3proxy_mutex_lock(&runningservices_mutex);
+  runningservices++;
+  _3proxy_mutex_unlock(&runningservices_mutex);
   mainfunc(d->argc, (char **)d->argv);
+  _3proxy_mutex_lock(&runningservices_mutex);
+  runningservices--;
+  _3proxy_mutex_unlock(&runningservices_mutex);
+  _3proxy_sem_unlock(serviceexited);
   return 0;
 }
 

src/ftppr.c

@@ -23,14 +23,18 @@ void * ftpprchild(struct clientparam* param) {
  SOCKET sc = INVALID_SOCKET, ss = INVALID_SOCKET, clidatasock = INVALID_SOCKET;
  SASIZETYPE sasize;
  char * req = NULL;
+#ifndef _WIN32
  struct linger lg;
+#endif
  struct pollfd fds;
 
  if(!(buf = malloc(BUFSIZE))) RETURN(876);
  param->ctrlsock = param->clisock;
  param->operation = CONNECT;
+#ifndef _WIN32
  lg.l_onoff = 1;
- lg.l_linger = conf.timeouts[STRING_L];;
+ lg.l_linger = conf.timeouts[STRING_L];
+#endif
  if(socksend(param, param->ctrlsock, (unsigned char *)"220 Ready\r\n", 11, conf.timeouts[STRING_S])!=11) {RETURN (801);}
  for(;;){
 	i = sockgetlinebuf(param, CLIENT, buf, BUFSIZE - 10, '\n', conf.timeouts[CONNECTION_S]);
@@ -262,8 +266,11 @@ void * ftpprchild(struct clientparam* param) {
 		}
 		sc = param->remsock;
 		param->remsock = ss;
+#ifndef _WIN32
+		/* not on Windows, see the accepting side in proxymain.c */
 		param->srv->so._setsockopt(param->sostate, param->remsock, SOL_SOCKET, SO_LINGER, (char *)&lg, sizeof(lg));
 		param->srv->so._setsockopt(param->sostate, clidatasock, SOL_SOCKET, SO_LINGER, (char *)&lg, sizeof(lg));
+#endif
 		param->clisock = clidatasock;
 		res = mapsocket(param, conf.timeouts[CONNECTION_S]);
 		if(param->remsock != INVALID_SOCKET) {

src/httpsrv.c

@@ -1154,6 +1154,37 @@ static void httpsrv_drain(struct clientparam *param, uint64_t len)
 	}
 }
 
+/* Ends a connection this server is closing while the client may still be
+   sending: a body which was not read, or a request sent behind one answered
+   with a close. Closing with that unread resets the connection, and the
+   client loses the answer. The sending side is shut down instead and what
+   arrives is thrown away until the client closes too, for a bounded time
+   and amount, which is what lets the answer be read. */
+static void httpsrv_linger(struct clientparam *param)
+{
+	char buf[HTTPSRV_BLOCK];
+	struct pollfd fd;
+	uint64_t left = HTTPSRV_MAXBODY;
+	time_t deadline = time(NULL) + conf.timeouts[LINGER_TO];
+
+	if(param->clisock == INVALID_SOCKET) return;
+	if(param->srv->so._shutdown(param->sostate, param->clisock, SHUT_WR)) return;
+	while(left){
+		int timeo = (int)(deadline - time(NULL));
+		int got;
+
+		if(timeo <= 0) break;
+		memset(&fd, 0, sizeof(fd));
+		fd.fd = param->clisock;
+		fd.events = POLLIN;
+		if(param->srv->so._poll(param->sostate, &fd, 1, timeo * 1000) <= 0) break;
+		got = (int)param->srv->so._recv(param->sostate, param->clisock, buf,
+			(left > sizeof(buf))? (int)sizeof(buf) : (int)left, 0);
+		if(got <= 0) break;
+		left -= (uint64_t)got;
+	}
+}
+
 /* Keeps the request as the client wrote it. Only what a handoff needs: the
    request line and the headers, exactly as they came, since the proxy code
    reads them again from the beginning. */
@@ -1451,6 +1482,12 @@ static int httpsrv_request(struct clientparam *param, struct httpreq *r)
 		}
 	}
 	if(i && i != 10){
+		/* The body goes before the answer, as for any answer this server
+		   gives: left in the stream it would be read as the next request. */
+		if(!r->drained){
+			if(r->contentlen) httpsrv_drain(param, r->contentlen);
+			r->drained = 1;
+		}
 		/* 4 no credentials, 5 unknown user, 6 wrong password: all of them
 		   should let the client offer credentials again. */
 		if(i >= 4 && i <= 6) op_authrequired(r);
@@ -1573,7 +1610,12 @@ void * httpsrvchild(struct clientparam *param)
 			dolog(param, (unsigned char *)logbuf);
 		}
 
-		if(handoff || !r.keepalive) break;
+		if(handoff) break;
+		if(!r.keepalive){
+			/* the client may still be sending; let it read the answer */
+			httpsrv_linger(param);
+			break;
+		}
 		first = 0;
 	}
 	/* A child named by an access rule takes the connection over, which the

src/proxy.h

@@ -467,6 +467,10 @@ struct dictionary;
 struct node;
 struct property;
 extern _3proxy_mutex_t config_mutex;
+/* services running, and a post each time one of them has finished */
+extern int runningservices;
+extern _3proxy_mutex_t runningservices_mutex;
+extern _3proxy_sem_t serviceexited;
 extern _3proxy_mutex_t bandlim_mutex;
 extern _3proxy_mutex_t connlim_mutex;
 extern _3proxy_mutex_t tc_mutex;
@@ -497,7 +501,8 @@ extern struct socketoptions {
 	int opt;
 	char * optname;
 } sockopts[];
-void setopts(SOCKET s, int opts);
+int getopts(const char *s, struct sockoptset *opts);
+void setopts(SOCKET s, const struct sockoptset *opts);
 char * printopts(char *sep);
 
 #ifdef _WINCE

src/proxymain.c

@@ -224,27 +224,62 @@ char * printopts(char *sep){
 }
 
 
-int getopts(const char *s){
+/* A comma separated list of options, each NAME or NAME=VALUE; a name alone
-	int i=0, ret=0;
+   stands for 1, or for TCP_MAXSEG for the value of maxseg. Options are added
-	for(; sockopts[i].optname; i++)if(strstr(s,sockopts[i].optname)) ret |= (1<<i);
+   to what is already set, so a default is changed only by naming it, and
-	return ret;
+   turned off with NAME=0. An unknown name or a value which is not a number
+   makes the whole list fail. */
+int getopts(const char *s, struct sockoptset *opts){
+	while(*s){
+		const char *end = strchr(s, ',');
+		const char *eq;
+		size_t len;
+		int i, value = 1;
+
+		if(!end) end = s + strlen(s);
+		eq = memchr(s, '=', (size_t)(end - s));
+		len = (size_t)((eq? eq : end) - s);
+		if(eq){
+			char *num;
+
+			if(!len) return -1;
+			value = (int)strtol(eq + 1, &num, 0);
+			if(num == eq + 1 || num != end) return -1;
+		}
+		else if(len) {
+#ifdef TCP_MAXSEG
+			if(len == 10 && !strncmp(s, "TCP_MAXSEG", 10)) value = 0;
+#endif
+		}
+		if(len){
+			for(i = 0; sockopts[i].optname; i++)
+				if(strlen(sockopts[i].optname) == len && !strncmp(s, sockopts[i].optname, len)) break;
+			if(!sockopts[i].optname || i >= MAXSOCKOPTS) return -1;
+			opts->set |= (1u << i);
+			opts->value[i] = value;
+		}
+		s = *end? end + 1 : end;
+	}
+	return 0;
 }
 
-void setopts(SOCKET s, int opts){
+void setopts(SOCKET s, const struct sockoptset *opts){
-	int i, opt, set;
+	int i, value;
-	for(i = 0; opts >= (opt = (1<<i)); i++){
+
-		set = 1;
+	for(i = 0; sockopts[i].optname && i < MAXSOCKOPTS; i++){
+		if(!(opts->set & (1u << i))) continue;
+		value = opts->value[i];
 #ifdef TCP_MAXSEG
-		if(sockopts[i].opt == TCP_MAXSEG){
+		if(sockopts[i].opt == TCP_MAXSEG && *sockopts[i].optname == 'T'){
-		    if(!conf.maxseg) continue;
+		    if(!value) value = conf.maxseg;
-		    set = conf.maxseg;
+		    if(!value) continue;
 		}
 #endif
-		if(opts & opt) setsockopt(s, *sockopts[i].optname == 'T'? IPPROTO_TCP:
+		setsockopt(s, *sockopts[i].optname == 'T'? IPPROTO_TCP:
 #ifdef SOL_IP
 			*sockopts[i].optname == 'I'? SOL_IP: 
 #endif
-			SOL_SOCKET, sockopts[i].opt, (char *)&set, sizeof(set));
+			SOL_SOCKET, sockopts[i].opt, (char *)&value, sizeof(value));
 	}
 }
 
@@ -306,7 +341,9 @@ int MODULEMAINFUNC (int argc, char** argv){
  unsigned char *cbc_string = NULL, *cbl_string = NULL;
  PROXYSOCKADDRTYPE cbsa;
  FILE *fp = NULL;
+#ifndef _WIN32
  struct linger lg;
+#endif
  int nlog = 5000;
  int haveslot = 0, nfull = 0;
 #ifdef __linux__
@@ -354,7 +391,9 @@ int MODULEMAINFUNC (int argc, char** argv){
 	" -64 Prefer IPv6 for outgoing connections, use both IPv4 and IPv6\n"
 	" -ocOPTIONS, -osOPTIONS, -olOPTIONS, -orOPTIONS -oROPTIONS - options for\n"
 	" to-client (oc), to-server (os), listening (ol) socket, connect back client\n"
-	" (or) socket, connect back server (oR) listening socket\n"
+	" (or) socket, connect back server (oR) listening socket, a comma separated\n"
+	" list of NAME or NAME=VALUE (NAME=0 turns an option off); TCP_NODELAY is\n"
+	" set on to-client and to-server sockets by default\n"
 	" where possible options are: ";
 #endif
 
@@ -399,6 +438,34 @@ int MODULEMAINFUNC (int argc, char** argv){
  srvinit(&srv, &defparam);
  srv.pf = childdef.pf;
  isudp = childdef.isudp;
+
+ /* Default socket options, which -oc, -os, -ol and -oR change by naming
+    them, NAME=0 to turn one off.
+
+    Nagle's algorithm holds back a short write until the previous one is
+    acknowledged, and a peer delays its acknowledgement, which stalls every
+    reply written in more than one piece.
+
+    SO_REUSEADDR is not set on Windows: it is not needed to rebind a
+    listening port there, and it only allows another local process to bind
+    the same address and port, with undefined behaviour as to which socket
+    receives the connections. Use -olSO_EXCLUSIVEADDRUSE to prevent that
+    instead. A Windows build which does not share the listening socket is the
+    exception: its UDP services bind a second socket to the same address to
+    answer from, and Windows only allows that when both sockets ask for it.
+ */
+ (void)getopts("TCP_NODELAY", &srv.clisockopts);
+ (void)getopts("TCP_NODELAY", &srv.srvsockopts);
+#ifndef _WIN32
+ (void)getopts("SO_REUSEADDR", &srv.lissockopts);
+ (void)getopts("SO_REUSEADDR", &srv.cbssockopts);
+#elif !defined SHARE_UDP_SOCKET
+ if(isudp) (void)getopts("SO_REUSEADDR", &srv.lissockopts);
+#endif
+#ifdef SO_REUSEPORT
+ (void)getopts("SO_REUSEPORT", &srv.lissockopts);
+ (void)getopts("SO_REUSEPORT", &srv.cbssockopts);
+#endif
 #ifndef NOUDPMAIN
  if(isudp) {
 	if(!udp_table.ihashtable)inithashtable(&udp_table, 64, 256, 65536);
@@ -625,7 +692,8 @@ int MODULEMAINFUNC (int argc, char** argv){
 			break;
 		case 's':
 #ifdef WITHSPLICE
-			if(isudp || srv.service == S_ADMIN)
+			/* admin is an httpsrv, where -s is the limited mode */
+			if(isudp || srv.service == S_ADMIN || srv.service == S_HTTPSRV)
 #endif
 				srv.s_option = 1 + atoi(argv[i]+2);
 #ifdef WITHSPLICE
@@ -636,19 +704,19 @@ int MODULEMAINFUNC (int argc, char** argv){
 		 case 'o':
 			switch(argv[i][2]){
 			 case 's':
-				srv.srvsockopts = getopts(argv[i]+3);
+				error = getopts(argv[i]+3, &srv.srvsockopts);
 				break;
 			 case 'c':
-				srv.clisockopts = getopts(argv[i]+3);
+				error = getopts(argv[i]+3, &srv.clisockopts);
 				break;
 			 case 'l':
-				srv.lissockopts = getopts(argv[i]+3);
+				error = getopts(argv[i]+3, &srv.lissockopts);
 				break;
 			 case 'r':
-				srv.cbcsockopts = getopts(argv[i]+3);
+				error = getopts(argv[i]+3, &srv.cbcsockopts);
 				break;
 			 case 'R':
-				srv.cbcsockopts = getopts(argv[i]+3);
+				error = getopts(argv[i]+3, &srv.cbssockopts);
 				break;
 			 default:
 				error = 1;
@@ -827,42 +895,13 @@ int MODULEMAINFUNC (int argc, char** argv){
 			perror("socket()");
 			return -2;
 		}
-		setopts(sock, srv.lissockopts);
+		setopts(sock, &srv.lissockopts);
 #ifdef _WIN32
 		ioctlsocket(sock, FIONBIO, &ul);
 #else
 		fcntl(sock,F_SETFL,O_NONBLOCK | fcntl(sock,F_GETFL));
 #endif
 		srv.srvsock = sock;
-#ifdef WITH_UN
-		if(*SAFAMILY(&srv.intsa) != AF_UNIX)
-#endif
-		{
-/* SO_REUSEADDR is not set on Windows: it is not needed to rebind a listening
-   port there, and it only allows another local process to bind the same
-   address and port, with undefined behaviour as to which socket receives the
-   connections. Use -olSO_EXCLUSIVEADDRUSE to prevent that instead.
-
-   A Windows build which does not share the listening socket is the exception:
-   its UDP services bind a second socket to the same address to answer from,
-   and Windows only allows that when both sockets ask for it.
- */
-#ifndef _WIN32
-		opt = 1;
-		if(srv.so._setsockopt(srv.so.state, sock, SOL_SOCKET, SO_REUSEADDR, (char *)&opt, sizeof(int)))perror("setsockopt()");
-#else
-#ifndef SHARE_UDP_SOCKET
-		if(isudp){
-			opt = 1;
-			if(srv.so._setsockopt(srv.so.state, sock, SOL_SOCKET, SO_REUSEADDR, (char *)&opt, sizeof(int)))perror("setsockopt()");
-		}
-#endif
-#endif
-#ifdef SO_REUSEPORT
-		opt = 1;
-		srv.so._setsockopt(srv.so.state, sock, SOL_SOCKET, SO_REUSEPORT, (char *)&opt, sizeof(int));
-#endif
-		}
 #if defined SO_BINDTODEVICE || defined IP_BOUND_IF
 		if(bindtodevice(&srv.so, srv.so.state, sock, srv.ibindtodevice, *SAFAMILY(&srv.intsa))) {
 		    dolog(&defparam, (unsigned char *)"failed to bind device");
@@ -955,16 +994,7 @@ int MODULEMAINFUNC (int argc, char** argv){
 		freesrvstrings(&srv, cbc_string, cbl_string);
 		return -6;
 	}
-#ifndef _WIN32
+	setopts(srv.cbsock, &srv.cbssockopts);
-	opt = 1;
-	srv.so._setsockopt(srv.so.state, srv.cbsock, SOL_SOCKET, SO_REUSEADDR, (char *)&opt, sizeof(int));
-#endif
-#ifdef SO_REUSEPORT
-	opt = 1;
-	srv.so._setsockopt(srv.so.state, srv.cbsock, SOL_SOCKET, SO_REUSEPORT, (char *)&opt, sizeof(int));
-#endif
-
-	setopts(srv.cbsock, srv.cbssockopts);
 
 	if(srv.so._bind(srv.so.state, srv.cbsock, (struct sockaddr*)&cbsa, SASIZE(&cbsa))==-1) {
 		dolog(&defparam, (unsigned char *)"Failed to bind connect back socket");
@@ -1023,7 +1053,7 @@ int MODULEMAINFUNC (int argc, char** argv){
 		if(iscbc){
 			new_sock=so._socket(so.state, SASOCK(&defparam.sincr), SOCK_STREAM, IPPROTO_TCP);
 			if(new_sock != INVALID_SOCKET){
-				setopts(new_sock, srv.cbcsockopts);
+				setopts(new_sock, &srv.cbcsockopts);
 
 				parsehost(srv.family, cbc_string, (struct sockaddr *)&defparam.sincr);
 #if defined SO_BINDTODEVICE || defined IP_BOUND_IF
@@ -1100,7 +1130,7 @@ int MODULEMAINFUNC (int argc, char** argv){
 				}
 				continue;
 			}
-			setopts(new_sock, srv.clisockopts);
+			setopts(new_sock, &srv.clisockopts);
 		}
 		size = sizeof(defparam.sincl);
 		if(srv.so._getsockname(srv.so.state, new_sock, (struct sockaddr *)&defparam.sincl, &size)){
@@ -1117,10 +1147,14 @@ int MODULEMAINFUNC (int argc, char** argv){
 #else
 		fcntl(new_sock,F_SETFL,O_NONBLOCK | fcntl(new_sock,F_GETFL));
 #endif
+#ifndef _WIN32
+		/* Not on Windows: there closesocket() on a non-blocking socket with a linger
+		   timeout fails with WSAEWOULDBLOCK while data is queued, leaving the socket
+		   open. Without it the close completes in the background, data first. */
 		lg.l_onoff = 1;
 		lg.l_linger = conf.timeouts[STRING_L];
-
 		srv.so._setsockopt(srv.so.state, new_sock, SOL_SOCKET, SO_LINGER, (char *)&lg, sizeof(lg));
+#endif
 		srv.so._setsockopt(srv.so.state, new_sock, SOL_SOCKET, SO_OOBINLINE, (char *)&opt, sizeof(int));
 	}
 #ifndef NOUDPMAIN
@@ -1413,21 +1447,34 @@ void freeparam(struct clientparam * param) {
 	}
 	if(param->clibuf) free(param->clibuf);
 	if(param->srvbuf) free(param->srvbuf);
+	/* Not shut down on Windows: there shutting down receiving resets the
+	   connection as soon as the peer sends anything more, and close()
+	   alone sends whatever is queued before its FIN. Elsewhere it stays:
+	   on the BSDs it discards what is left unread, so the close that
+	   follows is not turned into a reset. */
 	if(param->srv) {
 		if(param->ctrlsocksrv != INVALID_SOCKET && param->ctrlsocksrv != param->remsock) {
+#ifndef _WIN32
 			param->srv->so._shutdown(param->sostate, param->ctrlsocksrv, SHUT_RDWR);
+#endif
 			param->srv->so._closesocket(param->sostate, param->ctrlsocksrv);
 		}
 		if(param->ctrlsock != INVALID_SOCKET && param->ctrlsock != param->clisock) {
+#ifndef _WIN32
 			param->srv->so._shutdown(param->sostate, param->ctrlsock, SHUT_RDWR);
+#endif
 			param->srv->so._closesocket(param->sostate, param->ctrlsock);
 		}
 		if(param->remsock != INVALID_SOCKET) {
+#ifndef _WIN32
 			param->srv->so._shutdown(param->sostate, param->remsock, SHUT_RDWR);
+#endif
 			param->srv->so._closesocket(param->sostate, param->remsock);
 		}
 		if(param->clisock != INVALID_SOCKET) {
+#ifndef _WIN32
 			param->srv->so._shutdown(param->sostate, param->clisock, SHUT_RDWR);
+#endif
 			param->srv->so._closesocket(param->sostate, param->clisock);
 		}
 	}

src/sockmap.c

@@ -819,9 +819,6 @@ log("timeout");
  else if(inclientpipe || inserverpipe) res = 94;
 #endif
 
- if((param->nwrites > 0 && !SERVERTERMWRITE) || (param->nreads > 0 && !CLIENTTERMWRITE))
-	usleep(SLEEPTIME * 10);
-
 CLEANRET:
 
 #ifdef WITHSPLICE

src/socks.c

@@ -184,7 +184,7 @@ void * sockschild(struct clientparam* param) {
 	 param->operation = command == 2?BIND:UDPASSOC;
 	 if(command == 2){
 		if ((param->remsock=param->srv->so._socket(param->sostate, SASOCK(&param->req), SOCK_STREAM, IPPROTO_TCP)) == INVALID_SOCKET) {RETURN (11);}
-		setopts(param->remsock, param->srv->lissockopts);
+		setopts(param->remsock, &param->srv->lissockopts);
 		if(extbindtodevice(param, param->remsock)) {RETURN (12);}
 	 }
 	 break;

src/structures.h

@@ -529,6 +529,14 @@ struct filterp {
 
 #define MAX_FILTERS 16
 
+/* Socket options for one kind of socket, -oc and the like: which of
+   sockopts[] are given, by their index there, and the value of each. */
+#define MAXSOCKOPTS 32
+struct sockoptset {
+	unsigned set;
+	int value[MAXSOCKOPTS];
+};
+
 
 struct sockfuncs {
 	void * state;
@@ -613,7 +621,7 @@ struct srvparam {
 	int stacksize;
 	int noforce;
 	int anonymous;
-	int clisockopts, srvsockopts, lissockopts, cbcsockopts, cbssockopts;
+	struct sockoptset clisockopts, srvsockopts, lissockopts, cbcsockopts, cbssockopts;
 	int gracetraf, gracenum, gracedelay;
 	int requirecert;
 	int haproxy;

tests/cases/admin.py

@@ -1,10 +1,12 @@
 """The admin interface, now a set of handlers on the HTTP server."""
 
+import time
+
 
 def run(t):
     adm = t.free_port()
     lim = t.free_port()
-    t.start("admin", f"""
+    server = t.start("admin", f"""
         log
         auth iponly
         allow *
@@ -20,16 +22,34 @@ def run(t):
 
     url = f"http://127.0.0.1:{adm}"
 
+    def reload(path):
+        """Ask for a reload and wait for it to be done. It happens on the next
+        tick of the main loop, at most a second later; both old services stop
+        and the new ones start, and a request in between is refused (Windows
+        cannot bind a port still listening) or reset."""
+        before = server.output()
+        accepting = before.count("Accepting connections")
+        exiting = before.count("Exiting thread")
+        reply = t.http(url + path)
+        deadline = time.time() + 10
+        while time.time() < deadline:
+            now = server.output()
+            if (now.count("Accepting connections") >= accepting + 2
+                    and now.count("Exiting thread") >= exiting + 2):
+                break
+            time.sleep(0.05)
+        return reply
+
     # --- the predefined pages -----------------------------------------
     t.eq(200, t.http(url + "/").status, "the main page")
     t.eq(200, t.http(url + "/C").status, "the counters page")
-    t.eq(200, t.http(url + "/R").status, "the reload page")
+    t.eq(200, reload("/R").status, "the reload page")
     t.eq(200, t.http(url + "/S").status, "the services page")
 
     counters = t.http(url + "/C")
     t.contains(counters, "countin", "the counters page names the counter type")
     t.contains(counters, "<tr>", "the counters page renders a table")
-    t.contains(t.http(url + "/R"), "Reload", "the reload page confirms the request")
+    t.contains(reload("/R"), "Reload", "the reload page confirms the request")
     t.contains(t.http(url + "/S"), "<", "the services page returns markup")
 
     # --- the menu no longer offers the removed config editor -----------