A logger (struct logger) is identified by the string log or -l gives it:
"" stdout, "/dev/null" none, "@IDENT" syslog, "&DSN" ODBC, "radius",
anything else a file. Each type (struct logtype) has init, formatting of
a connection into a buffer, writing, close, and a periodic tick for
rotation and flushing; ODBC and RADIUS register their types from 3proxy,
which alone has them. Services and configurations hold the logger they
use; the last to let go closes it, except the standard ones (none,
stdout, stderr, syslog), which are opened at startup and kept.
-l takes every log type now, and a file named by several services or by
both log and -l is opened once. rotate and archiver are bound to the
logger of the last log command when its configuration comes into force,
and every file logger is rotated by the main loop.
Errors with no connection go to a new stderr logger; after daemon, or as
a Windows service, stdout logging writes nothing and errors go to the
last log configured. A log whose writes keep failing is closed and
reopened; while it cannot be, its lines go to stderr and it is retried
every minute. ODBC's own reconnection throttle gives way to this.
Formatting (logbuf) is separate from counting traffic and clearing the
statistics, done once by logdo(), the services' log function, so a later
step can format or copy a connection's line and write it from a thread
of its own. dologname() and timechanged() move to log.c, which the
standalone services link as well.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each service resolves names the way the last of defaultresolve (the name
servers in force, configured or the system's with the hosts file),
fakeresolve (127.0.0.2) and sysresolve (the C library) read before it
says; the last one in the configuration also applies outside services.
defaultresolve is the new command, and the default.
The name servers and the hosts file no longer depend on the mode: nserver
lines, or the system's, are always in force, so dnspr keeps forwarding;
with fakeresolve it does not, as before. fakeresolver moves to common.c,
which the standalone services link without resolve.c.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Without nserver (or fakeresolve) names were resolved by the C library.
3proxy's own resolver is now the default, with the system's name
servers: up to 3 from /etc/resolv.conf, on Windows from the registry
(set for the system, set for an interface with an address, Tcpip6
interfaces, then those DHCP gave). With none found, the C library as
before. nserver takes up to 3 as well (MAXNSERVERS), a fourth is
warned about.
The name servers in force belong to the process, not a configuration:
nserver lines are kept aside while a configuration is read and replace
them only once it is committed, so a reload resolves with those in
force until then. Resolutions and dnspr read a copy of them.
The system's are read at start, before the configuration and a chroot
in it, and are in force while it is read, so its host names resolve
with them; read again at a commit, and checked every 5 seconds from
the main loop while the default is in force. What cannot be read then
(within a chroot) stays as last read.
The hosts file, read with them, is imported into tables of its own
while the default is in force: its first address of a family for a
name. A name is looked up as one nsrecord made first, then the hosts
file, then the name cache, then name servers. A changed file replaces
what was imported. No name cache is made for it: without nscache
nothing is cached, as before.
The name cache's keys are host names of any case now: DNS names are.
Tests: sysdns, a name of the hosts file answered by dnspr without
nserver, in any case, and not with one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A listener counts the traffic of its clients as it is logged: bytes from
servers (%I) and from clients (%O). clearstat(), which every log writer
calls once a line is logged, as well as lognone and logradius, adds the
counts to the client's listener before clearing them, through
listenertrafficfunc, set where services have listeners and NULL in the
standalone binaries.
The admin services page shows them as listenertrafin and
listenertrafout. The takeover case checks that they go on through three
reloads.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After a reload, unless noforce, a client of an old service goes by the
rules of the newest service on its listener, the one accepting there
now. It takes one of that service's maxconn slots, which counts it
there and keeps that service and its configuration alive until the
client is done, and is re-authenticated as its client: access lists,
users, authentication, bandwidth limits and traffic counters come from
the new configuration. A later reload moves it on, giving the slot
back. The client stays its own service's child, which keeps its
filters and TLS state.
It is dropped if its service was removed or is of another type now
(26), or if the newest service has no free slot (27); what the
re-authentication refuses ends it as before. A service without a
listener (UDP, connecting back) keeps its clients as they are.
This restores what force did before the configuration was kept per
service: since then a client compared its version with its own
service's configuration, which never changes, and was never checked
again. Services now take their configuration's version as it is: a
reload numbers the new configuration before reading it, and so does
startup now, where services were numbered one ahead.
A listener now stays with its old service until that service's last
client is gone, those clients looking the newest service up through
it; the socket itself is still closed as soon as nobody accepts on it.
Connection limits are given back in the configuration they were taken
in. PSRV() is the service whose rules apply to a client.
The reload case checks that a download of a user the new configuration
keeps finishes under it, and that one of a user it removes is cut.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A service's TCP listening socket is kept as a listener: when a reload
commits, before the old services are told to stop, each new service
takes over the listener of an older configuration's service on the same
address, port, network namespace and device with the same -ol options.
It skips socket() and bind(), calling only listen() again for its own
backlog, and logs "Accepting connections, taken over". The old service
stops accepting at its next poll and lets go of the socket; whoever
lets go last closes it, unlinking a Unix socket's path.
So a service staying where it was no longer leaves a gap: before, the
old one closed its socket and the new one opened another, and a
connection queued on the old socket was reset. UDP services, whose
clients read from the service's socket, and two services of the same
configuration on one address keep their own sockets as before.
A test case makes requests nonstop through three reloads and wants none
refused or reset; against the build before this, connections were
reset. The reload case no longer waits out the switch. SIGUSR1 in
3proxy(8) describes how a reload behaves now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A reload reads the file into a new configuration, allocated from the
defaults, and prepares its services without starting them. Only if the
whole file is read without an error does it come into force: the old
configuration's services stop accepting, the new ones start. On an
error everything prepared is dropped and the old configuration, which
never stopped, stays in force.
Each service holds its configuration until it is freed, after its last
client; a configuration no longer in force is released when the last
holder lets go (confhold/confput). freeconf() now only releases what a
configuration holds, touching nothing global.
What runs without a service of its own reads the configuration in
force, runconf, rather than conf, which a reload points at the one
being read: the resolver, which holds it while it waits (a client
resolves with its own service's), the log, the thread pool, the admin
pages, which walk the services under config_mutex, and the signal
handlers.
The users table, havelog and the resolver choice are per configuration
now, the resolver applied when the configuration comes into force, so
a refused file leaves the users as they were. The log file, the
configuration file name, the string table, daemon mode and the filter
list belong to the process and are handed from one configuration to
the next. Settings left out of a new file go back to their defaults,
where before they kept the old values.
The gap between the old and the new listening sockets remains: a
connection queued on an old service's socket when it closes is reset.
Handing the socket over is the next phase.
A test case reloads a broken file (nothing changes, alice still gets
in, bob from the refused file does not) and a good one (bob only, the
service on its new port, the old one closed, a download through the
old service finishing whole). 40 reloads, a third refused, under load
show no memory errors under AddressSanitizer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
conf is now a pointer to the current configuration rather than the
structure itself: at first confboot, which exists before main() runs, as
plugins and the standalone services use it too; later configurations
will start from confdefaults. Both are made from confinit.h, the one list
of initial values. The timeouts are an array of the configuration
instead of a pointer to a global one. Nothing behaves differently yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
What a numbered counter counted now belongs to the process: a counter
rule points to the value of its number, created the first time the
number is met (from the counter file, if one is open) and shared by the
rules of that number in every configuration loaded. A reload no longer
resets it when there is no counter file, and once configurations can
outlive one another, clients of the old and the new one count into the
same value. An unnumbered counter, and those LdapPlugin makes, keep a
value of their own as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
They are the state of the process, not configuration: conf.time (now
curtime), timetoexit and needreload are globals of their own. Plugins
reach needreload through a pointer added at the end of struct
pluginlink; LdapPlugin uses it. The extern for a paused global, never
defined, goes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
