The clients of a -R service all wait for the connection back on the
same listening socket, which was blocking: one connection woke them
all, one took it, and the others were left in accept() until the next,
past their time out and through a reload. The socket is non-blocking,
and an accept() which finds nothing, the connection taken by another
client or gone, is not one of the client's tries. nonblock() makes a
socket non-blocking, acceptagain() tells such an accept().
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 126c7d00ec)
A peer gone is then an error of the send rather than SIGPIPE. SIGPIPE
stays ignored for what cannot pass the flag: TLS writes and splice().
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The loop went through every session three times a turn: for the nearest
deadline, to register its sockets with epoll, and for the deadlines come
and the sessions ended. A datagram cost as much as the sessions there
were, idle ones too.
- The deadlines are in a binary heap, the nearest at its top: the wait
is until the top, and the sessions timed out are taken from the top
down to the first not due. A datagram only moves a session's deadline
later, which leaves the heap as it is: the session is looked at again
when its old deadline comes, and put back where its deadline is then,
once in its timeout however many datagrams it had. A deadline set
earlier by a handler goes up the heap.
- A session ended is put on a list and let go at the end of the turn,
and its sockets are registered with epoll after the loop or a handler
had it, not every session every turn.
- Deadlines are milliseconds of monotime(), CLOCK_MONOTONIC (the
performance counter on Windows), which the time of day being set does
not move: before, a clock set back kept sessions for as long, and one
set forward ended them all. The loop reads it once a turn, in u->now.
With epoll, a datagram costs the same with 20000 idle sessions as with
none (38-40 us of the proxy's CPU a round trip, ARM), where it took 59
before. poll() elsewhere still builds its set every turn.
Tests: a session heard from every half second lives through two seconds
of idle timeout, and ends two seconds after the last datagram.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each service resolves names the way the last of defaultresolve (the name
servers in force, configured or the system's with the hosts file),
fakeresolve (127.0.0.2) and sysresolve (the C library) read before it
says; the last one in the configuration also applies outside services.
defaultresolve is the new command, and the default.
The name servers and the hosts file no longer depend on the mode: nserver
lines, or the system's, are always in force, so dnspr keeps forwarding;
with fakeresolve it does not, as before. fakeresolver moves to common.c,
which the standalone services link without resolve.c.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A listener counts the traffic of its clients as it is logged: bytes from
servers (%I) and from clients (%O). clearstat(), which every log writer
calls once a line is logged, as well as lognone and logradius, adds the
counts to the client's listener before clearing them, through
listenertrafficfunc, set where services have listeners and NULL in the
standalone binaries.
The admin services page shows them as listenertrafin and
listenertrafout. The takeover case checks that they go on through three
reloads.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
UDP sessions check for a reload in udpsockmap() as TCP connections do
in sockmap(): unless noforce, a session goes by the newest service on
its listener, re-authenticated as its client, or is dropped.
A request on a connection that outlives a reload, an HTTP one kept
alive, is authorized by clientauth(): it moves the connection to the
newest service on its listener first if a reload came since, then
authorizes as the service whose rules apply (PSRV). The proxy uses it
for every request, so a request of a user the new configuration
removed is answered 407 rather than authorized by the old rules and
cut while relayed. reattach() takes whether to authenticate: sockmap()
and udpsockmap() move and authenticate at once, clientauth() moves and
then authorizes the request.
A test case covers the drops: with one slot free in the new service one
of two downloads moves on and the other is cut (27; a service keeps one
of its maxconn slots for the next connection it accepts), and a proxy
download is cut when a socks service takes its port (26). The reload
case checks the kept-alive request.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
After a reload, unless noforce, a client of an old service goes by the
rules of the newest service on its listener, the one accepting there
now. It takes one of that service's maxconn slots, which counts it
there and keeps that service and its configuration alive until the
client is done, and is re-authenticated as its client: access lists,
users, authentication, bandwidth limits and traffic counters come from
the new configuration. A later reload moves it on, giving the slot
back. The client stays its own service's child, which keeps its
filters and TLS state.
It is dropped if its service was removed or is of another type now
(26), or if the newest service has no free slot (27); what the
re-authentication refuses ends it as before. A service without a
listener (UDP, connecting back) keeps its clients as they are.
This restores what force did before the configuration was kept per
service: since then a client compared its version with its own
service's configuration, which never changes, and was never checked
again. Services now take their configuration's version as it is: a
reload numbers the new configuration before reading it, and so does
startup now, where services were numbered one ahead.
A listener now stays with its old service until that service's last
client is gone, those clients looking the newest service up through
it; the socket itself is still closed as soon as nobody accepts on it.
Connection limits are given back in the configuration they were taken
in. PSRV() is the service whose rules apply to a client.
The reload case checks that a download of a user the new configuration
keeps finishes under it, and that one of a user it removes is cut.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A reload reads the file into a new configuration, allocated from the
defaults, and prepares its services without starting them. Only if the
whole file is read without an error does it come into force: the old
configuration's services stop accepting, the new ones start. On an
error everything prepared is dropped and the old configuration, which
never stopped, stays in force.
Each service holds its configuration until it is freed, after its last
client; a configuration no longer in force is released when the last
holder lets go (confhold/confput). freeconf() now only releases what a
configuration holds, touching nothing global.
What runs without a service of its own reads the configuration in
force, runconf, rather than conf, which a reload points at the one
being read: the resolver, which holds it while it waits (a client
resolves with its own service's), the log, the thread pool, the admin
pages, which walk the services under config_mutex, and the signal
handlers.
The users table, havelog and the resolver choice are per configuration
now, the resolver applied when the configuration comes into force, so
a refused file leaves the users as they were. The log file, the
configuration file name, the string table, daemon mode and the filter
list belong to the process and are handed from one configuration to
the next. Settings left out of a new file go back to their defaults,
where before they kept the old values.
The gap between the old and the new listening sockets remains: a
connection queued on an old service's socket when it closes is reset.
Handing the socket over is the next phase.
A test case reloads a broken file (nothing changes, alice still gets
in, bob from the refused file does not) and a good one (bob only, the
service on its new port, the old one closed, a download through the
old service finishing whole). 40 reloads, a third refused, under load
show no memory errors under AddressSanitizer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
conf is now a pointer to the current configuration rather than the
structure itself: at first confboot, which exists before main() runs, as
plugins and the standalone services use it too; later configurations
will start from confdefaults. Both are made from confinit.h, the one list
of initial values. The timeouts are an array of the configuration
instead of a pointer to a global one. Nothing behaves differently yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
conf.haveerror was only initialised and srvparam.srvfds only declared;
the extern declarations of stdlog and demon named globals that do not
exist (both are fields of conf); a local in make_ace() and one in the
webadmin XML page were never used.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
They are the state of the process, not configuration: conf.time (now
curtime), timetoexit and needreload are globals of their own. Plugins
reach needreload through a pointer added at the end of struct
pluginlink; LdapPlugin uses it. The extern for a paused global, never
defined, goes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
nservers, numservers and authnserver (resolve.c, common.c) and
radiuslist, nradservers and radiussecret (authradius.c) were globals of
their own; they are configuration, set by nserver, authnserver and
radius, and now live in struct extparam with the rest of it.
MAXNSERVERS, MAXRADIUS and struct radserver move to structures.h, which
plugins include without proxy.h.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dialer ran a program when a name could not be resolved, for dial-up
links; with nscache it did not even run. The command is still accepted
and ignored, so configurations using it keep loading.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Like the timeouts, each service now keeps the values given before it
instead of reading the global ones while its connections run. setopts()
takes the service's maxseg. The TLS handshakes wait the service's
CONNECT_TO, kept in its SSL configuration, rather than the global one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Outside Linux nssocket() was a macro, and two of its callers have #ifdef
WITH_UN among its arguments. Preprocessor directives in macro arguments
are undefined behaviour: gcc and clang take them, MSVC does not. It is a
function on every system now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
extport binds a local port out of its range and connects from it. A port
which is free to bind may still be half of a pair which is closing from an
earlier connection to the same destination, and Windows fails the connect
with WSAEADDRINUSE where other systems fail the bind and fall back. The
request then failed with error 13 for a reason another port would have
avoided, which is what the range is searched for in the first place.
Retry the connect with another port from the range. Only for that error, so
a destination which is simply unreachable still costs one attempt, and out of
the same ten tries the bind already spends, so the attempts parentretries
makes are not multiplied. EADDRINUSE joins the errno values proxy.h maps to
their Winsock numbers, without which the test would never match on Windows.
parent_ports gave its three services one window between them, which is how
the case met the collision on the Windows runner. Each has its own now.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Use unix:/path/to/socket, e.g.
tcppm 1234 unix:/path/to/socket 1234
Under linux abstract sockets are supported with '@' prefix, e.g.
parent 1000 http unix:@virtual.3proxy.socket 1111
Destination port numbers are not used in tcppm/parent, but you must specify any positive value to match the syntaxis.