IPv6 and name resolution documentation updated for 0.8

This commit is contained in:
z3APA3A committed 2016-01-15 01:24:08 +03:00
1 parent 27a190cd04
commit d1f8180eab
2 files changed
+64 -5

No files matched your search

+41
View File
@@ -33,6 +33,8 @@
<li><A HREF="#BANDLIM">How to limit bandwidth</A>
<li><A HREF="#TRAFLIM">How to limit traffic amount</A>
<li><A HREF="#NETLIST">How to build network lists</A>
<li><a href="#NSCACHING">How to configure name resolution and DNS caching</a>
<li><a href="#IPv6">How to use IPv6</a>
</ul>
<li><A HREF="#CLIENT">Client configuration</A>
<li><A HREF="#ADMIN">Administering and information analisys</A>
@@ -738,6 +740,45 @@ In this example we obtain list of local networks from provider's page to
local.networks file, allow direct access to these networks and redirect all
connection to external networks to provider's proxy.
</p>
<li><a name="NSCACHING"><i>How to configure name resolution and DNS caching</i></a>
<p>
For name resolution and caching use commands nserver, nscache / nscache6 and nsrecord.
<pre>
nserver 192.168.1.2
nserver 192.168.1.3:5353/tcp</pre>
sets DNS resolvers. 192.168.1.3 will be used via TCP/5353 (instead of default UDP/53)
only if 192.168.1.2 fails. Up to 5 nservers may be specified.
If no nserver is configured, default system name resolution functions are used.
<pre>
nscache 65535
nscache6 65535</pre>
sets name cache size for IPv4 and IPv6. Name cache must be large enouth, if presents.
name cache is only used if nserver is configured.
<pre>
nsrecord server.mycompany.example.com 192.168.1.1
nsrecord www.porno.com 127.0.0.2
...
deny * * 127.0.0.2</pre>
adds static nsrecords. Also, static nsrecords are used for dnspr, unless -s option is specified.
Since 0.8 version, parent proxy may be configured for dnspr.
</p>
<li><a name="IPv6"><i>How to use IPv6</i></a>
<p>
IPv6 is supported since 0.8. Please note, some proxy protolos, e.g. SOCKSv4,
do not support IPv6. SOCKSv5 supports IPv6 with special request type (must be
implemented by client).
<br>
3proxy supports proxying from IPv4 and IPv6 networks to IPv4,
IPv6 and mixed networks. IPv6 address may be used in
internal, external, parent commands, ACLs, -i and -e options,etc.
external command and -e options may be given twice for each service - once with IPv4
and once with IPv6 address. internal can be given only once, to bind to all IPv4 and
IPv6 addresses use [0:0:0:0:0:0:0:0] or [::].
<br>
Any service may be configured with -4, -46, -64, -6 options to specify decied
priority for name to IPv4/IPv6 address resolution (IPv4 only, IPv4 priority,
IPv6 priority, IPv6 only).
</p>
</ul>
<hr>